The Main Function Of Hospital Baby Equipment Infant Care Incubator ECOR004
It is mainly used to provide a cultivation and treatment environment for low-body weight infants, weak illnesses, weak infants, and premature babies, which are used in the cultivation environment with clean air and suitable temperature and humidity. It is used for constant temperature culture, body temperature recovery, infusion, oxygen transmission, rescue, and hospitalization observation. The transshipment training box is also used to transport babies safely.
Product feature:
Air temp.and skin temp.servo-controlled by computer
Humidity servo-control by computer
>37ºC temperature setting
Various self-checkalarms
Free-step mattress tilting adjustmentRemovable humidity trough, easy to cleanWith the transfusion shelf and tray
Added with guardrail
RS-232 connectorPhototherapy(option)
O2 controller(option)
Electrical scale (option)
| Infant Care Incubator ECOR004 parameters | |
| Packing size(Up) | 108*64*92cm |
| Packing size(Down) | 108*64*84cm |
| N.W.(Up) | 65Kg/51Kg |
| N.W.(Down) | 55Kg/44Kg |
| Environment temperature | -10ºC~70ºC |
| Environment relative humidity | ≤80% |
| Atmospheric Pressure | 500~1060hpa |
How to use the infant incubator:
First Point: Preparation
1. Do a good job of cleaning the whole machine and disinfection.
2. Lock the foot wheel of the whole machine to prevent the whole machine from moving.
3. The power cord -the end is inserted from the power supply input jack from the side of the chassis, and the other end is correctly inserted into the 220V/50Hz power socket, which is reliable.
4. Add an appropriate amount of distilled water to the water cup.
Second Point: Operation method
1. Turn on the power switch → the temperature controller enters the self -inspection status. Except for the ultra -temperature alarm indicator and the power -off alarm indicator, all indicators and digital tubes are on → All lights are destroyed → Display the temperature of the box and set the temperature value → If you do not press any keys, automatically enter the box temperature control status → The temperature value of the boot setting is to keep the setting value of the last shutdown.
2. Press the settings → Enter the box temperature setting status → set the temperature display window flickering. According to clinical needs, the temperature setting temperature is changed, push the add and subtract key to make the setting temperature display window consistent with the required value → Exit the setting state → enter the box temperature control state (if you do not press the box temperature key, wait for about 15 seconds to automatically enter the box temperature control status.
Third Point: Nursing method
When your baby cares, open the front panel lock, put down the front door panel, you can put in the baby, close the front door panel and lock the lock. When the baby needs to care, you can use the elbow to press the door lock and reach into the elliptical door for operation. In order to avoid the baby's cold, reduce the door opening time as much as possible. Hurry up and close the door after the completion.